Combined Infection Control Interventions Protect Essential Food Workers from Occupational Exposures to SARS-CoV-2 in the Agricultural Environment.

Essential food workers experience elevated risks of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection due to prolonged occupational exposures in food production and processing areas, shared transportation (car or bus), and employer-provided shared housing. Our goal was to quantify the daily cumulative risk of SARS-CoV-2 infection for healthy susceptible produce workers and to evaluate the relative reduction in risk attributable to food industry interventions and vaccination. We simulated daily SARS-CoV-2 exposures of indoor and outdoor produce workers through six linked quantitative microbial risk assessment (QMRA) model scenarios. For each scenario, the infectious viral dose emitted by a symptomatic worker was calculated across aerosol, droplet, and fomite-mediated transmission pathways. Standard industry interventions (2-m physical distancing, handwashing, surface disinfection, universal masking, ventilation) were simulated to assess relative risk reductions from baseline risk (no interventions, 1-m distance). Implementation of industry interventions reduced an indoor worker's relative infection risk by 98.0% (0.020; 95% uncertainty interval [UI], 0.005 to 0.104) from baseline risk (1.00; 95% UI, 0.995 to 1.00) and an outdoor worker's relative infection risk by 94.5% (0.027; 95% UI, 0.013 to 0.055) from baseline risk (0.487; 95% UI, 0.257 to 0.825). Integrating these interventions with two-dose mRNA vaccinations (86 to 99% efficacy), representing a worker's protective immunity to infection, reduced the relative infection risk from baseline for indoor workers by 99.9% (0.001; 95% UI, 0.0002 to 0.005) and outdoor workers by 99.6% (0.002; 95% UI, 0.0003 to 0.005). Consistent implementation of combined industry interventions, paired with vaccination, effectively mitigates the elevated risks from occupationally acquired SARS-CoV-2 infection faced by produce workers. IMPORTANCE This is the first study to estimate the daily risk of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection across a variety of indoor and outdoor environmental settings relevant to food workers (e.g., shared transportation [car or bus], enclosed produce processing facility and accompanying breakroom, outdoor produce harvesting field, shared housing facility) through a linked quantitative microbial risk assessment framework. Our model has demonstrated that the elevated daily SARS-CoV-2 infection risk experienced by indoor and outdoor produce workers can be reduced below 1% when vaccinations (optimal vaccine efficacy, 86 to 99%) are implemented with recommended infection control strategies (e.g., handwashing, surface disinfection, universal masking, physical distancing, and increased ventilation). Our novel findings provide scenario-specific infection risk estimates that can be utilized by food industry managers to target high-risk scenarios with effective infection mitigation strategies, which was informed through more realistic and context-driven modeling estimates of the infection risk faced by essential food workers daily. Bundled interventions, particularly if they include vaccination, yield significant reductions (>99%) in daily SARS-CoV-2 infection risk for essential food workers in enclosed and open-air environments.

Decontamination of SARS-CoV-2 from cold-chain food packaging provides no marginal benefit in risk reduction to food workers.

Countries continue to debate the need for decontamination of cold-chain food packaging to reduce possible severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) fomite transmission among frontline workers. While laboratory-based studies demonstrate persistence of SARS-CoV-2 on surfaces, the likelihood of fomite-mediated transmission under real-life conditions is uncertain. Using a quantitative microbial risk assessment model of a frozen food packaging facility, we simulated 1) SARS-CoV-2 fomite-mediated infection risks following worker exposure to contaminated plastic packaging; and 2) reductions in these risks from masking, handwashing, and vaccination. In a frozen food facility without interventions, SARS-CoV-2 infection risk to a susceptible worker from contact with contaminated packaging was 1.5 × 10-3 per 1h-period (5th - 95th percentile: 9.2 × 10-6, 1.2 × 10-2). Standard food industry infection control interventions, handwashing and masking, reduced risk (99.4%) to 8.5 × 10-6 risk per 1h-period (5th - 95th percentile: 2.8 × 10-8, 6.6 × 10-5). Vaccination of the susceptible worker (two doses Pfizer/Moderna, vaccine effectiveness: 86-99%) with handwashing and masking reduced risk to 5.2 × 10-7 risk per 1h-period (5th - 95th percentile: 1.8 × 10-9, 5.4 × 10-6). Simulating increased transmissibility of current and future variants (Delta, Omicron), (2-, 10-fold viral shedding) among a fully vaccinated workforce, handwashing and masking continued to mitigate risk (1.4 × 10-6 - 8.8 × 10-6 risk per 1h-period). Additional decontamination of frozen food plastic packaging reduced infection risks to 1.2 × 10-8 risk per 1h-period (5th - 95th percentile: 1.9 × 10-11, 9.5 × 10-8). Given that standard infection control interventions reduced risks well below 1 × 10-4 (World Health Organization water quality risk thresholds), additional packaging decontamination suggest no marginal benefit in risk reduction. Consequences of this decontamination may include increased chemical exposures to workers, food quality and hazard risks to consumers, and unnecessary added costs to governments and the global food industry.

Controlling risk of SARS-CoV-2 infection in essential workers of enclosed food manufacturing facilities.

The SARS-CoV-2 global pandemic poses significant health risks to workers who are essential to maintaining the food supply chain. Using a quantitative risk assessment model, this study characterized the impact of risk reduction strategies for controlling SARS-CoV-2 transmission (droplet, aerosol, fomite-mediated) among front-line workers in a representative indoor fresh fruit and vegetable manufacturing facility. We simulated: 1) individual and cumulative SARS-CoV-2 infection risks from close contact (droplet and aerosols at 1-3 m), aerosol, and fomite-mediated exposures to a susceptible worker following exposure to an infected worker during an 8 h-shift; and 2) the relative reduction in SARS-CoV-2 infection risk attributed to infection control interventions (physical distancing, mask use, ventilation, surface disinfection, hand hygiene, vaccination). Without mitigation measures, the SARS-CoV-2 infection risk was largest for close contact (droplet and aerosol) at 1 m (0.96, 5th - 95th percentile: 0.67-1.0). In comparison, risk associated with fomite (0.26, 5th - 95th percentile: 0.10-0.56) or aerosol exposure alone (0.05, 5th - 95th percentile: 0.01-0.13) at 1 m distance was substantially lower (73-95%). At 1 m, droplet transmission predominated over aerosol and fomite-mediated transmission, however, this changed by 3 m, with aerosols comprising the majority of the exposure dose. Increasing physical distancing reduced risk by 84% (1-2 m) and 91% (1-3 m). Universal mask use reduced infection risk by 52-88%, depending on mask type. Increasing ventilation (from 0.1 to 2-8 air changes/hour) resulted in risk reductions of 14-54% (1 m) and 55-85% (2 m). Combining these strategies, together with handwashing and surface disinfection, resulted in <1% infection risk. Partial or full vaccination of the susceptible worker resulted in risk reductions of 73-92% (1 m risk range: 0.08-0.26). However, vaccination paired with other interventions (ACH 2, mask use, or distancing) was necessary to achieve infection risks <1%. Current industry SARS-CoV-2 risk reduction strategies, particularly when bundled, provide significant protection to essential food workers.

Low risk of SARS-CoV-2 transmission via fomite, even in cold-chain.

BACKGROUND: Countries continue to debate the need for decontamination of cold-chain food packaging to reduce possible SARS-CoV-2 fomite transmission among workers. While laboratory-based studies demonstrate persistence of SARS-CoV-2 on surfaces, the likelihood of fomite-mediated transmission under real-life conditions is uncertain. METHODS: Using a quantitative risk assessment model, we simulated in a frozen food packaging facility 1) SARS-CoV-2 fomite-mediated infection risks following worker exposure to contaminated plastic packaging; and 2) reductions in these risks attributed to masking, handwashing, and vaccination. FINDINGS: In a representative facility with no specific interventions, SARS-CoV-2 infection risk to a susceptible worker from contact with contaminated packaging was 2·8 × 10 -3 per 1h-period (95%CI: 6·9 × 10 -6 , 2·4 × 10 -2 ). Implementation of standard infection control measures, handwashing and masks (9·4 × 10 -6 risk per 1h-period, 95%CI: 2·3 × 10 -8 , 8·1 × 10 -5 ), substantially reduced risk (99·7%). Vaccination of the susceptible worker (two doses Pfizer/Moderna, vaccine effectiveness: 86-99%) combined with handwashing and masking reduced risk to less than 1·0 × 10 -6 . Simulating increased infectiousness/transmissibility of new variants (2-, 10-fold viral shedding) among a fully vaccinated workforce, handwashing and masks continued to mitigate risk (2·0 × 10 -6 -1·1 × 10 -5 risk per 1h-period). Decontamination of packaging in addition to these interventions reduced infection risks to below the 1·0 × 10 -6 risk threshold. INTERPRETATION: Fomite-mediated SARS-CoV-2 infection risks were very low under cold-chain conditions. Handwashing and masking provide significant protection to workers, especially when paired with vaccination. FUNDING: U.S. Department of Agriculture.

Controlling risk of SARS-CoV-2 infection in essential workers of enclosed food manufacturing facilities.

The SARS-CoV-2 global pandemic poses significant health risks to workers who are essential to maintaining the food supply chain. Using a quantitative risk assessment model, this study characterized the impact of risk reduction strategies for controlling SARS-CoV-2 transmission (droplet, aerosol, fomite-mediated) among front-line workers in a representative enclosed food manufacturing facility. We simulated: 1) individual and cumulative SARS-CoV-2 infection risks from close contact (droplet and aerosols at 1-3m), aerosol, and fomite-mediated exposures to a susceptible worker following exposure to an infected worker during an 8h-shift; and 2) the relative reduction in SARS-CoV-2 infection risk attributed to infection control interventions (physical distancing, mask use, ventilation, surface disinfection, hand hygiene). Without mitigation measures, the SARS-CoV-2 infection risk was largest for close contact (droplet and aerosol) at 1m (0.96, 95%CI: 0.67-1.0). In comparison, risk associated with fomite (0.26, 95%CI: 0.10-0.56) or aerosol exposure alone (0.05, 95%CI: 0.01-0.13) at 1m distance was substantially lower (73-95%). At 1m, droplet transmission predominated over aerosol and fomite-mediated transmission, however, this changed by 3m, with aerosols comprising the majority of the exposure dose. Increasing physical distancing reduced risk by 84% (1 to 2m) and 91% (1 to 3m). Universal mask use reduced infection risk by 52-88%, depending on mask type. Increasing ventilation (from 0.1 to 2-8 air changes/hour) resulted in risk reductions of 14-54% (1m) and 55-85% (2m). Combining these strategies, together with handwashing and surface disinfection, resulted in <1% infection risk. Current industry SARS-CoV-2 risk reduction strategies, particularly when bundled, provide significant protection to essential food workers. SIGNIFICANCE STATEMENT: Using mathematical modeling, we find that workers in enclosed food manufacturing facilities are at higher risk of SARS-CoV-2 infection from close contact transmission (exposure to large droplets and small aerosol particles) than fomite transmission. Thus, strategies protecting workers should prioritize close contact transmission pathways, such as physical distancing, universal mask use, and room air changes, with surface disinfection (reducing fomite transmission) and handwashing of secondary importance. Our work supports current international (EU-OSHA), domestic (FDA, OSHA), and food industry-standard guidance for managing COVID-19 transmission in essential workers in the food manufacturing sector. Although our model was designed for an indoor food manufacturing setting, it can be readily adapted to other indoor environments and infectious respiratory pathogens.